1.Before the step of lasting. insoles and uppers do not need to be
cemented manually. The machine not only saves labors, but also
ensures insole sand uppers never deglue when heated after lasting
which always keeps shoes in perfect shape.
2.All-around forming band and specially tracked wipers ensure
uppers more evenly and closely attached to lasts after lasting. No
protrusion will happen so the surface becomes more beautiful. and
the quality is upgraded.
3.The mechanism of toe part pressing pad adopts adjustable 2-stage
pressure. The design of compound cylinder helps shoes reach the
best quality on the proceeding of wiper lasting and final pressing
and ensure the smoothness of shoe lasting feather edge. There are
two pressing methods for the first pressure of toe pad pressing
mechanism. The consistent pressing function makes the lasting
process smoothly. The position fixed function avoids the over
lasting and Pulling down of toe uppers when using the soft leather.
(Fig.1)
4.Each set of Pincers can be individual adjusted to their
corresponding positions and functioned with automatic balancing.
Besides, an automatic down pulling stroke can be selected and
controlled according to the tension of uppers.
5.The 9 independent Pincers can be individually adjusted to cope
with the lasting of any shape of shoe toes. The automatic balance
device and the theory of automatic descending on wipers�� advancing
are the very key points for upgrading the quality and raising the
production capacity.
6.The wipers are functioned with inching movement and speed
adjustment, which makes the whole adjustment of lasting control
more convenient.
7.The machine is equipped with cross projector assembly, which is
convenient for correcting toe lasting and helps green hand to
easily operate the machine.
8.The last support Plate is functioned with two-stage rising
mechanism, which can prevent the lasts slip off in conjunction with
the action of heel supporter.
9.The rapid instating and releasing structure re for Pincers can
finish the whole process within 30 seconds. (Fig.2)
10.The middle Pincers can be adjusted 15��both to the right and the
left according to the shape of toes.
11.The height of the last support Plate is remote controlled. There
is a numerical instruction provided for reference, which makes
machine easier to operate. (Fig.3)
12.The pressure and speed for each mechanism are adjusted and the
pressure gage is also installed at the outside of the machine that
makes the operation and adjustment more conveniently.
13.The rising speed of last support-plate is two--stage
automatically transferring which can upgrade the production
efficiency for the easy--broken uppers��
14.The lasting adjustment works without any tool, it is indicated
on the rulers for graduation and position. (Fig��4)
15.The newly designed forward and backward adjusting mechanisms for
last support-plates can quickly adjust the corrects position of
last support-plates and mid Pincers according to the different
sizes of shoes. 1t saves 20-30miniutes when change shoe size from
the biggest to the kid��s. (Fig.5)
16.Supplemental wipers Owing to the assistance of supplemental
wipers, the 9-pincer toe lasting machine can prolong the length of
lasting down to cover the point of sole. After being lasted through
the device��the toe upper will be more closely attached to the
last. The structure of supplemental wipers inessential for making
perfect shoes especially when side and heel lasting machine will
follow for one time forming. (Fig.6)
17.Rotary pincers The fifth Pincers can rotate inward when the
wipers move in and last the shoes(patent no. 86206459)��The rotary
angle can be adjusted which will help the upper at ball point more
stretched and attached to the last by the aid of supplemental
wipers. The shoes will be lasted and finished perfectly. (Fig.7)
18.Speedy adjustment of pincers base plate The pincers base plate
adopts the double-tracking structure. It is independently adjusted
on the right and the left (patent no��36247). The rotary point of
pincers base plate is located at the point between the first and
second pincers. The curve in between will be changed when the
groups of right and left pincers are adjusted, which will keep the
uppers more attached to the lasts. (Fig.8)
19.Adjustable cement plate Generally, the cement plate on an
automatic toe cementing lasting machine is usually fixed and
stable. The structure of being adjustable quite fits the production
for different shoes mixing on the same production line. Without any
tool, the plate can be easily and quickly adjusted to have an
appropriate cementing position for different sizes of shoes, which
will produce perfect cementing effect and will not have to cha
